|
|
| Part Number 3WA965SE2S |
|
|
| Price |
|
 |
|
|
|
|
|
|
|
| Description |
Specifications- Mfr Part Number: 9650SE-2LP SGL
- Features:
- 8th-generation StorSwitch non-blocking switched architecture
- On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives
- Bootable array support for greater fault tolerance
- Variable stripe size for performance tuning by application
- 64-bit LBA support
- ATA pass-through mode support
- 128MB DDR2-533 memory with ECC protection
- 32 pooled DMA channels
- Complete configuration management suite:
- 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool
- 3ware Disk Manager 2 (3DM2) - browser-based management tool
- Command Line Interface (CLI) - scriptable configuration tool
- SNMP support
- SMTP support for email/pager notification
- ATA/6 and Out of band (OOB) staggered drive spin-up support
- Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN
- Multiple logical unit sizes and RAID levels on one card
- Multiple card support within a system for large storage requirements
- Hot-swap and hot-spare support for data availability
- Dynamic sector repair for robust data protection
- S.M.A.R.T. disk drive monitoring for reliability
- Emergency Flash Recovery protects against failed firmware upgrade
- Drive activity LED support
- Online Capacity Expansion and RAID Level Migration
- Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal
- Drive insertion and removal notification
- Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane)
- Chassis Control Unit for enclosure management via I2C
- Port: 2x SATA, Serial ATA 2.6 Specification support
- Host Interface: PCI-Express x1, PCI Express 1.1 compliant
- Raid Levels: 0, 1, Single Disk, JBOD
- Onboard Memory: 128MB DDR2-533
- Connector Type: Discrete
- BBU Support: No
- BIOS PnP (plug and play) and BBS (BIOS boot specification) support
- Power Requirements: 18W maximum
- Form Factor: Low Profile
- Dimensions (LxH): 7.3 x 2.73 inch / 18.54 x 6.93 cm
- Package: OEM
|
|
|
|
|
|
|
|
|
|
|
